The Cross Sheeting Unit is a servo-driven lateral sheeting module that rolls across the direction of travel to improve cross-web thickness and formed-product geometry. Farhat configures the machine around the product, so dough condition, geometry, upstream flow and the next process are defined before the final model is released.
The machine’s role is specific: it is a servo-driven lateral sheeting module that rolls across the direction of travel to improve cross-web thickness and formed-product geometry. Its value comes from making one critical operation repeatable while protecting the product for the next stage. Farhat engineers the product-contact path, drive arrangement, sensing, settings and transfer geometry as one system.
The cross sheeting unit can be considered for pizza bases, round flatbread products, continuous sheets needing transverse calibration, and custom products proven through trials. Compatibility is confirmed with the intended dough or finished product.
The cross-sheeting cycle and conveyor motion must be validated together. Its capacity is product- and stroke-dependent rather than a single universal pieces-per-hour figure. The controls scope should define permissives, blocked-product detection, upstream stop logic, downstream-ready signals, emergency-stop zones and restart behavior.
The figures below describe the uploaded reference configuration; they are not universal guarantees for every Farhat project.
| Verified reference model | F28V2-110-ST |
| Reference roller | 143 mm UHMW |
| Reference cross-rolling width | 1,250 mm |
| Reference thickness range | 1-25 mm |
| Reference line speed | 3-9 m/min |
| Approximate dimensions | 655 x 2,000 x 1,780 mm |
| Approximate weight | 410 kg |
Servo-driven lateral sheeting module. Reference model F28V2-110-ST: 143 mm UHMW roller, 1,250 mm cross-rolling width, 1-25 mm thickness range, 3-9 m/min line speed, linear guides and dampers control the transverse stroke.
Cross-direction rolling improves thickness uniformity and roundness that inline sheeting alone cannot achieve. Servo stroke tunes to product width and cycle timing. Supported product path protects delicate sheets.
Configurable roller sizing, cross-rolling width, stroke and cycle programming to match your product and line speed. Retrofit scope may include support plates, guarding and software interlocks.
It is a servo-driven lateral sheeting module that rolls across the direction of travel to improve cross-web thickness and formed-product geometry. Farhat supplies it as a configured machine or as an integrated module within a bakery production line.
Typical applications include pizza bases, round flatbread products, continuous sheets needing transverse calibration, and custom products proven through trials. Final compatibility depends on the recipe, product state, dimensions and required handling, so representative trials or samples are recommended.
Capacity is calculated from the approved product pitch, rows, mechanical cycle, belt speed and surrounding equipment. The quotation should distinguish a reference maximum from the expected net production rate for the customer’s SKU.
Yes, when a site survey or verified drawings establish the infeed and discharge elevations, available footprint, product flow, utilities and controls interface. Retrofit scope may include new transition conveyors, guarding and software interlocks.
Farhat needs product samples or photographs, recipe and dough conditions where relevant, dimensions and tolerances, required output, row layout, utilities, sanitation method, plant drawing and the upstream/downstream machine details.
Leaving so soon? Let’s make your first order special! Tell us what you’re baking, and we’ll help you excel. Don’t forget to subscribe for insider tips and latest trends.
